Applications

• Agricultural Tanks
• Oil & Gas
• Food & Beverage
• Landscape/Irrigation
• Many more

Notes

• Industrial (ASTM D1998-15) and Commercial design standards available.
• Material options for a diverse range of applications.
• High-density linear polyethylene (HDLPE)*- black and natural white color – complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
• Cross-linked, high-density polyethylene (XLPE) – black and natural white color.
• For outdoor Sodium Hypochlorite applications – Opaque white UV block out resin #880059 is available for vertical tanks up to 12500 gallons are vertical tanks (all sizes) can be covered with 1″ thick polyurethane foam insulation with mastic coatings to block harmful UV exposure.
• Sulfuric acid resin #880046 (All size vertical tanks except for 16,500 gallons).
• Available with IBC 2015/CBC 2016 seismic and 150 mph wind restraint tie-down systems.
• Specific gravity ratings are based on the industry’s most severe calculation.
• Standard specific gravity choices are 1.35, 1.5 and 1.9, other ratings are available upon request.
• All materials are UV stabilized for long-term outdoor service.
• Dimensions listed and on drawings may vary /- 3% (standard Molding tolerance).

Installation and Usage Guidelines

• CHEMICAL – Buyer, and user, if different, are solely responsible for making
  product selection and assuring chemical to be stored is suitable for the use of the product in
  the application.
• CAPACITY – It is recommended that tanks only be filled to their rated capacity,
  not brimful capacity.
• TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
  polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
• PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
  pressure only.
• VENTING – Venting equipment should be sized to limit pressure or vacuum in the
  tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
  the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
  will void your warranty.
• INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
  fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
  Installation prior to receiving and installing tanks.