Available in 30°, 45°, and 60° slopes, sizes range from 15-13,000 gallons.
Material options for a diverse range of application requirements.
High-density linear polyethylene (HDLPE)*- black and natural white color – complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
Cross-linked, high-density polyethylene (XLPE) – black and natural white color.
Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems.
Specific gravity ratings are based on the industry’s most severe calculation.
Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
All materials are UV stabilized for long-term outdoor service.
Maximum operating temperature recommended for Cone Bottom tanks is 100 degrees F.
Installation and Usage Guidelines
CHEMICAL – Buyer, and user, if different, are solely responsible for making
product selection and assuring chemical to be stored is suitable for the use of the product in
CAPACITY – It is recommended that tanks only be filled to their rated capacity,
not brimful capacity.
TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
VENTING – Venting equipment should be sized to limit pressure or vacuum in the
tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
will void your warranty.
INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
Installation prior to receiving and installing tanks.
1000 Gallon Industrial Cone Bottom Tank 86″D 83″H
Industrial (ASTM D1998-15) Available
FDA and NSF/ANSI61 Standards
All Materials UV Stabilized
HDLPE Black & Natural White
1000 Gallon Industrial Cone Bottom Tank by Snyder Industrial.
1000 Gallon Industrial Cone Bottom Tank by Snyder Industrial. Dimensions 86X83 made of High-Density linear polyethylene (HDLPE) meeting both FDA and NSF/ANSI 61 standards. Available in both black and natural white. Our tanks are the finest Industrial Tanks in the industry. Line Drawing With All Standard Features Include:1000 Gallon Cone Bottom Tank
Take the first step towards solving your water management challenges with National Storage Tank, Inc. Reach out to our team now, and let us guide you toward the perfect water storage solution for your project.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.