• Agricultural Tanks
  • Oil & Gas
  • Food & Beverage
  • Landscape/Irrigation
  • Many more


  • Material options for primary tanks for a diverse range of application requirements.
  • High-density linear polyethylene (HDLPE)*- black and natural white color – complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
  • Cross-linked, high-density polyethylene (XLPE) – black and natural white color.
  • Opaque white sodium hypochlorite resin #880059 (for primary tank).
  • Sulfuric acid resin #880046 (for primary tank).
  • Containment basins constructed of HDLPE (Black Color) and are available with or without a detachable pump shelf.
  • Containment basins are nestable for shipping with the pump shelf removed.
  • Available in a wide variety of sizes, 35-440 gallons.
  • Polyethylene stands are available (as an option) to provide easy access to bottom sidewall or bottom of tank connections.
  • Tanks designed for chemicals with specific gravities up to 1.9.
  • All materials are UV stabilized for long-term outdoor service.

Installation and Usage Guidelines

  • CHEMICAL – Buyer, and user, if different, are solely responsible for making
    product selection and assuring chemical to be stored is suitable for the use of the product in
    the application.
  • CAPACITY – It is recommended that tanks only be filled to their rated capacity,
    not brimful capacity.
  • TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
    polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
  • PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
    pressure only.
  • VENTING – Venting equipment should be sized to limit pressure or vacuum in the
    tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
    the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
    will void your warranty.
  • INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
    fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
    Installation prior to receiving and installing tanks.

200 Gallon Industrial Chemical Feed Station Tank 62″D 57″H 76″L

  • Industrial (ASTM D1998-15) Available
  • FDA and NSF/ANSI61 Standards
  • All Materials UV Stabilized
  • HDLPE Black & Natural White

200 Gallon Industrial Chemical Feed Station Tank by Snyder Industrial.

Color *


200 Gallon Industrial Chemical Feed Station Tank by Snyder Industrial. Dimensions 62X57X76 made of High-Density linear polyethylene (HDLPE) meeting both FDA and NSF/ANSI 61 standards. Available in both black and natural white. Our tanks are the finest Industrial Tanks in the industry.
Line Drawing With All Standard Features Include: 200 Gallon Chemical Feed Station Tank

Capacity 200 Gallons
Diameter 62″
Height 57″
Length 76″
Weight 160 lbs
Material High-Density Linear Polyethylene (HDLPE)
Color Natural White or Black
Fittings See Line Drawing
Design Standard Industrial (ASTM D1998-15) & Commercial
Tie Down Lugs No
Specific Gravity 1.9
Manufacture Snyder Industrial
Certifications FDA 177.1520 & NSF/ANSI-61
Chemical Resistance Recommendation Chart Chart

Additional Information

Additional information

Dimensions 76 × 57 in


Height (FT)








SKU 5720103CF Categories ,