Applications

• Agricultural Tanks
• Oil & Gas
• Food & Beverage
• Landscape/Irrigation
• Many more

Notes

• Material options for a diverse range of application requirements.
• High-density linear polyethylene (HDLPE)*- black and natural white color complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
• Cross-linked, high density polyethylene (XLPE) – black and natural white color.
• Opaque white sodium hypochlorite resin #880059 (up to 525 Gal.).
• Sulfuric acid resin #880046 (up to 525 Gal.).
• Low profile designs increase safety factors.
• Available in a wide variety of styles, 30-3400 gallons.
• Horizontal products are available in specific gravities up to 1.9.
• All materials are UV stabilized for long-term outdoor service.

Installation and Usage Guidelines

• CHEMICAL – Buyer, and user, if different, are solely responsible for making
  product selection and assuring chemical to be stored is suitable for the use of the product in
  the application.
• CAPACITY – It is recommended that tanks only be filled to their rated capacity,
  not brimful capacity.
• TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
  polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
• PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
  pressure only.
• VENTING – Venting equipment should be sized to limit pressure or vacuum in the
  tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
  the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
  will void your warranty.
• INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
  fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
  Installation prior to receiving and installing tanks.