Applications

• Agricultural Tanks
• Oil & Gas
• Food & Beverage
• Landscape/Irrigation
• Many more

Notes

• Material options for a diverse range of applications.
• High-density linear polyethylene (HDLPE)* – black and natural white color complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards
• Industrial (ASTM D1998) design standards
• Cross-linked, high-density polyethylene (XLPE) – black and natural white color
• Opaque white sodium hypochlorite resin #880059
• Sulfuric acid resin #880046
• Available with IBC/CBC seismic and 150 mph wind restraint tie-down systems
• Specific gravity ratings are based on the industry’s most severe calculation
• Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request
• All materials are UV stabilized for long-term outdoor service

Installation and Usage Guidelines

• CHEMICAL – Buyer, and user, if different, are solely responsible for making
  product selection and assuring chemical to be stored is suitable for the use of the product in
  the application.
• CAPACITY – It is recommended that tanks only be filled to their rated capacity,
  not brimful capacity.
• TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
  polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
• PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
  pressure only.
• VENTING – Venting equipment should be sized to limit pressure or vacuum in the
  tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
  the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
  will void your warranty.
• INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
  fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
  Installation prior to receiving and installing tanks.