850 Gallon Industrial Total Drain Tank 48″D 126″H
Applications
- Agricultural Tanks
- Oil & Gas
- Food & Beverage
- Landscape/Irrigation
- Many more
Notes
- Available in 30°, 45°, and 60° slopes, sizes range from 15-13,000 gallons.
- Material options for a diverse range of application requirements.
- High-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
- Cross-linked, high-density polyethylene (XLPE) - black and natural white color.
- Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems.
- Specific gravity ratings are based on the industry's most severe calculation.
- Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
- All materials are UV stabilized for long-term outdoor service.
- Maximum operating temperature recommended for Cone Bottom tanks is 100 degrees F.
Installation and Usage Guidelines
- CHEMICAL - Buyer, and user, if different, are solely responsible for making product selection and assuring chemical to be stored is suitable for the use of the product in the application.
- CAPACITY - It is recommended that tanks only be filled to their rated capacity, not brimful capacity.
- TEMPERATURE - Prevent excessive heat near or inside the tank. Standard polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
- PRESSURE - Tanks are not pressure vessels and are designed for atmospheric pressure only.
- VENTING - Venting equipment should be sized to limit pressure or vacuum in the tank to a maximum of ½" water column (0.018 psi.) Additional precautions may be required if the tank will be filled pneumatically (using air pressure). Failure to provide proper venting will void your warranty.
- INSTALLATION - Do not rigidly pipe tanks. Flexible connections are required at fitting connections to maintain the warranty. Consult Snyder's Guidelines for Use and Installation prior to receiving and installing tanks.
- Industrial (ASTM D1998-15) Available
- FDA and NSF/ANSI61 Standards
- All Materials UV Stabilized
- HDLPE Black & Natural White
Shipping Info
| Ships From | NE |
|---|---|
| Shipping Cost | Call 866-959-7593 for Shipping Quote |
Description
850 Gallon Industrial Total Drain Tank by Snyder Industrial. Dimensions 48X126 made of High-Density linear polyethylene (HDLPE) meeting both FDA and NSF/ANSI 61 standards. Available in both black and natural white. Our tanks are the finest Industrial Tanks in the industry.
Line Drawing With All Standard Features Include: 850 Gallon Total Drain Tank
| Capacity | 850 Gallons |
|---|---|
| Diameter | 48″ |
| Height | 126″ |
| Weight | 480 lbs |
| Material | High-Density Linear Polyethylene (HDLPE) |
| Color | Natural White or Black |
| Fittings | See Line Drawing |
| Design Standard | Industrial (ASTM D1998-15) & Commercial |
| Tie Down Lugs | No |
| Specific Gravity | 1.9 |
| Manufacture | Snyder Industrial |
| Certifications | FDA 177.1520 & NSF/ANSI-61 |
| Chemical Resistance Recommendation Chart | Chart |
Additional Information
| D/W | 48 |
|---|---|
| H | 126 |
| Manufacturer | Snyder Industrial |
