Search

Poly Tank Help

707-943-5705

Buy NOW!

Applications

  • Agricultural Tanks
  • Oil & Gas
  • Food & Beverage
  • Landscape/Irrigation
  • Many more

Notes

  • Industrial (ASTM D1998-15) and Commercial design standards available.
  • Material options for a diverse range of applications.
  • High-density linear polyethylene (HDLPE)*- black and natural white color – complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards.
  • Cross-linked, high-density polyethylene (XLPE) – black and natural white color.
  • For outdoor Sodium Hypochlorite applications – Opaque white UV block out resin #880059 is available for vertical tanks up to 12500 gallons are vertical tanks (all sizes) can be covered with 1″ thick polyurethane foam insulation with mastic coatings to block harmful UV exposure.
  • Sulfuric acid resin #880046 (All size vertical tanks except for 16,500 gallons).
  • Available with IBC 2015/CBC 2016 seismic and 150 mph wind restraint tie-down systems.
  • Specific gravity ratings are based on the industry’s most severe calculation.
  • Standard specific gravity choices are 1.35, 1.5 and 1.9, other ratings are available upon request.
  • All materials are UV stabilized for long-term outdoor service.
  • Dimensions listed and on drawings may vary /- 3% (standard Molding tolerance).

Installation and Usage Guidelines

  • CHEMICAL – Buyer, and user, if different, are solely responsible for making
    product selection and assuring chemical to be stored is suitable for the use of the product in
    the application.
  • CAPACITY – It is recommended that tanks only be filled to their rated capacity,
    not brimful capacity.
  • TEMPERATURE – Prevent excessive heat near or inside the tank. Standard
    polyethylene tanks are designed for a maximum continuous the temperature of 100°F / 37.7°C.
  • PRESSURE – Tanks are not pressure vessels and are designed for atmospheric
    pressure only.
  • VENTING – Venting equipment should be sized to limit pressure or vacuum in the
    tank to a maximum of ½” water column (0.018 psi.) Additional precautions may be required if
    the tank will be filled pneumatically (using air pressure). Failure to provide proper venting
    will void your warranty.
  • INSTALLATION – Do not rigidly pipe tanks. Flexible connections are required at
    fitting connections to maintain the warranty. Consult Snyder’s Guidelines for Use and
    Installation prior to receiving and installing tanks.

850 Gallon Industrial Vertical Tank

  • Industrial (ASTM D1998-15) Available
  • FDA and NSF/ANSI61 Standards
  • All Materials UV Stabilized
  • HDLPE Black & Natural White

850 Gallon Industrial Vertical Tank.

Description

850 Gallon Industrial Vertical Tank by Snyder Industrial. Dimensions 48X117 made of High-Density linear polyethylene (HDLPE) meeting both FDA and NSF/ANSI 61 standards. Available in both black and natural white. Our tanks are the finest Industrial Tanks in the industry.

Capacity 850 Gallons
Diameter 48″
Apex Height 117″
Weight 220 lbs.
Material High-Density Linear Polyethylene (HDLPE)
Color Natural White or Black
Fittings See Line Drawing
Design Standard Industrial (ASTM D1998-15) & Commercial
Tie Down Lugs Yes
Specific Gravity 1.9
Manufacture Snyder Industrial
Certifications FDA 177.1520 & NSF/ANSI-61
Chemical Resistance Recommendation Chart Chart

Additional Information

Additional information

Weight 220 lbs
Dimensions 48 × 117 in
Diameter

48

Height (FT)

117

Manufacturer

Snyder

Size

850

FOB

WV

SKU 1810200N Categories ,